Pages

Showing posts with label MTB. Show all posts
Showing posts with label MTB. Show all posts

11 July 2016

A short mountain bike film: MTB Peguerinos

Enjoy the great outdoors traveling with your mountain bike. Gain access to a world of possibilities and discover the tranquility of nature. Get to peaceful places, often remote from the tourist throng and far from noise and pollution. Listen to your exploration spirit and find yourself surrounded by beautiful views. Filmed at Cueva Valiente, Peguerinos, Spain.


Cameras and equipment: GoPro Hero 4, DMC FZ48, DJI Phantom 3
Editing: Premiere Pro CC
Music: Royalty Free Background Music by e-soundtrax https://www.youtube.com/channel/UCmqmVRMWMj8pIW9K5bfuBjw

--
https://vimeo.com/niropter
https://www.youtube.com/user/niropter

18 April 2014

Aerial MTB Enduro with quadcopter

V011. Recording date: 23-03-2014

This has been the first time I shot video flying with the Naza M Lite with GPS flight controller. So in one hand I was feeling more confident in case of losing video signal or disorientation, but in the other hand I was a bit nervous because of my lack of practice with this controller.

I´m a bit disappointed because of the jello effect. As you can see, most part of it is at the beginning of the video. I´m not quite sure about the causes yet. I think it´s a mix of:

- vibrations of the motors (mainly when I go forward pretty fast)
- the propellers don´t fit exactly as they should
- I use bullet propeller holders
- maybe flying in GPS mode?
- too bright conditions with the GoPro. Under these conditions it uses a very fast shutter speed which records all the tiny high-frequency vibrations from your motors, props, etc., and causes this rolling shotter effect, or jello.

Fixing this is still a priority in my To-Do list, as I have to eliminate lot´s of shots that could be used perfectly in the final footage because of the jello. I will try to reduce part of it using a neutral density filter to reduce the shutter speed but letting through enough light for a clear picture. This is how I do it: http://niropter.blogspot.com.es/

Please check your compass is pointing in the same direction as the nose of the quad! After a bad landing, I didn´t realise it rotated almost 45º right, so it was nearly impossible to control it in the air. I still don´t know how I managed to land it. You can easily crash it and cause an accident.

Apart from that, the experience of recording a rider descending the hill at high speed has been amazing. Most part of the times I could not caught him up!


Setup:

Frame Whirlwind FY450
BL-2830/11 1000kv motors
20A SK ESC
10x4.5 Carbon fiber propellers
Naza M Lite with GPS
GoPro H3 black, 1080x60, N FOV
3300mAh 3S 20C battery
Futaba 8FG Super Transmitter
Futaba R6208SB receiver
Fatshark FPV camera
Fatshark Predator goggles
ImmersionRC 600mw Tx
1000mAh 3S 20C battery for video Tx
Gimbal Tarot T-2D
500mAh 3S 20C battery for gimbal
Plastic landing gear

24 September 2013

Aerial footage chasing MTB rider

September 2013. Re-edited video, sorry about the quality. This time I try to follow for the first time a moving objective, a mountain bike rider, using the FPV camera, the goggles, and recording with the GPH3. The challenge here is controlling the speed of the quad so the camera points to the rider at all times, even if he speeds up or slows down while riding up the slope. Also being careful with the low side shots, because as it wasn't a flat scenery it was so easy to crash against the bush.

Using moongel to get rid of jello.


Setup:

Frame Whirlwind FY450
BL-2830/11 1000kv rotors
20A SK ESC
10x4.5 Plastic HK propellers
KK2 controller board
GoPro H3 black, 1080x60, N FOV
3300mAh 3S 20C battery
Turnigy 9XR transmitter
FrSKY V8FR-II receiver
Fatshark FPV camera
1000mAh 3S 20C battery for video Tx
Fatshark Predator goggles
ImmersionRC 600mw Tx
Plastic landing gear