niropter: BL-2830/11 motors

Showing posts with label BL-2830/11 motors. Show all posts

14 July 2014

Flying the Iconic X FPV

Fun flight with this quadcopter. I haven´t worked on the jello issue yet as I haven´t had many free time lately. This quad is light, fast and powerful!

One of the screws holding the GoPro platform was a bit loose and I lost it, so the platform rotated and the camera has hit with the propeller. Now the camera is not sending video live!! I´ll reset it with the factory settings and hopefully it will work again.

For better view DO NOT put full screen ;)

Setup:

Frame Iconic X FPV Foldable
BL-2830/11 1000kv motors
20A SK ESC
10x4.5 Plastic HK propellers
KK2 controller board
FrSKY V8FR-II receiver
Turnigy 9XR transmitter

19 May 2014

Iconic X FPV foldable maiden flight

This is the maiden flight with the frame Iconix X FPV foldable. I have only placed the basics (no FPV equipment yet) to test it.

The camera is placed on the front of the frame, directly over it with no anti-vibration dampeners (only the ones that come with the frame to isolate the top plate). The results, as you can see, are dreadful!! I guess this is because the old motors, whose holders are a bit bended and produce this horrible vibrations :)

The total weight of this equipment is 1.9kg, and I have had the following flight times:

14 minutes with a Turnigy 3S 4000 mAh
17 minutes with a Turnigy 3S 5000 mAh

There´s something funny about two of the motors. If I attach them with more than 1 screw out of 4, the motors don't work!!! So those two motors are attached to the frame with just one screw each!

Setup:

Frame Iconic X FPV Foldable
BL-2830/11 1000kv motors
20A SK ESC
10x4.5 Plastic HK propellers
KK2 controller board
FrSKY V8FR-II receiver
Turnigy 9XR transmitter

10 May 2014

Build of the Iconic X FPV foldable

Yesterday I worked on the Iconic X FPV I bought on September. It took me some hours for this basic setup, as I have reused the motors I had before, same propellers, ESCs, the KK2 and the FrSky receiver with the Turnigy 9XR. Ready to fly!

The objective is having a better setup and probably a gimbal as well. But so far I will just see how it flyes. I need the FPV equipment also!

Setup:

Frame Iconic X FPV Foldable
BL-2830/11 1000kv motors
20A SK ESC
10x4.5 Plastic HK propellers
KK2 controller board
FrSKY V8FR-II receiver
Turnigy 9XR transmitter