This is the maiden flight with the frame Iconix X FPV foldable. I have only placed the basics (no FPV equipment yet) to test it.
The camera is placed on the front of the frame, directly over it with no anti-vibration dampeners (only the ones that come with the frame to isolate the top plate). The results, as you can see, are dreadful!! I guess this is because the old motors, whose holders are a bit bended and produce this horrible vibrations :)
The total weight of this equipment is 1.9kg, and I have had the following flight times:
- 14 minutes with a Turnigy 3S 4000 mAh
- 17 minutes with a Turnigy 3S 5000 mAh
There´s something funny about two of the motors. If I attach them with more than 1 screw out of 4, the motors don't work!!! So those two motors are attached to the frame with just one screw each!
Setup:
Frame Iconic X FPV Foldable
BL-2830/11 1000kv motors
20A SK ESC
10x4.5 Plastic HK propellers
KK2 controller board
FrSKY V8FR-II receiver
Turnigy 9XR transmitter
No comments:
Post a Comment